Whole-home ducted heating and cooling across Melbourne and Victoria.Estimate your running costs

Free tool. No email needed.

What will whole-home
comfort cost to run?

Estimate your ducted system's electricity costs. Save the result or use it to plan a replacement.

Ducted running-cost planner

Calculated in your browser
1 Choose what you know

Example inputs only, not typical usage or sizing advice. Use your system's electrical input, not cooling capacity.

2 Add your details

Use total electrical input for your heating or cooling mode, including indoor and outdoor components. Check the manufacturer's specifications. Watts ÷ 1,000 = kW.

Use your bill's GST-inclusive rate. Enter 30 for 30 cents. Calculate each time-of-use rate period separately.

No personal details are needed for a result.

How your estimate works

Input kWTotal hours$/kWhYour cost
Calculation methods and assumptions

Daily: electrical input kW × hours per day × days × electricity rate in dollars/kWh. For example, 4 × 6 × 30 × $0.30 = $216.00. This holds input constant; a ducted inverter's actual consumption varies with operation, zoning, weather, settings and the building. It is a scenario, not a bill forecast.

Annual: add the label's cooling and heating kWh for one climate zone, then multiply by dollars/kWh. The monthly average is annual cost ÷ 12, not a prediction of seasonal bills. Use this method only when annual label data is available for your model. Government label guide.

Both methods exclude installation, maintenance, fixed supply and demand charges, and solar credits. Daily mode excludes standby use. Use a GST-inclusive tariff and calculate time-of-use rate periods separately.

Where do I find electrical input?

Check the manufacturer's specification for the complete indoor and outdoor system combination in your chosen mode. Electrical input is the power the system uses; heating or cooling capacity describes its output. If only component figures are shown, ask the manufacturer or our team to confirm the correct total. Energy Rating explains input and capacity.

Will closing zones reduce my cost by the same percentage?

No fixed percentage is assumed here. Zoning changes the load, but a ducted system's electrical input does not necessarily fall in direct proportion to the number of rooms. Use supported system data rather than dividing full-system input by the number of zones.

Can this choose my replacement system?

This tool estimates running costs, not system size. Replacing an older central system needs an assessment of your home, existing ducts and electrical supply. Explore whole-home ducted replacement.

Are my details required?

No. Calculate, download or print without providing contact details. The enquiry form is optional. See our Privacy Policy.

Planning a ducted replacement?Ask about your whole-home upgrade.

Make your next system
the right fit.

Tell us about your older ducted or central system. We'll help you plan its replacement.

Use the result button to include your running-cost plan.

Call +61 478 090 766

By sending this form, you agree to be contacted about your enquiry. See our Privacy Policy.

Call usGet a free quote